Sewing machines are very important in the seamstress or tailoring business. Having a sewing machine that does not sew is just like having synonymous with having a vacuum cleaner that does not clean.
Sometimes, your sewing machines might make holes in the fabrics but they will not be able to sew the fabric.
There are different reasons for that, and if you are facing the same problem, then this guide is meant for you.
Reasons Why Sewing Machine Making Holes But Not Sewing
There are many reasons why sewing machines often make holes in fabrics but do not sew them together.
Sewing machines use a zigzag stitch to attach pieces of fabric together, and the edges of the stitches can catch on these tiny threads that wind around the gears inside the machine. As a result, one or more stitches will be pulled out–usually near where you pressed your foot down on the pedal to start stitching–and your seam will look unfinished.
This type of problem is common when it comes to sewing machines and the problems are usually issues that can be fixed without critical knowledge of the sewing machine.
Here are reasons why your sewing machine is making holes but it won’t sew:
i. While Sewing Your Thread Breaks
While you’re sewing, if your thread breaks, your machine won’t be able to finish the stitches it’s now attempting. You’ll end up with a lot of holes and no stitching, thanks to this. Several factors can cause your thread to break.
The first factor that will affect the strength and performance of your thread is its age, exposure, and quality. Numerous spools of thread from unknown sources, vintages, or quality can be found in many people’s sewing supplies. Cheap, low-quality thread and outdated, sun-exposed thread are both easily breakable.
When purchasing a sewing machine or larger sewing materials, spools of thread are frequently given out as bonuses. Many sewers have a large collection of outdated, low-quality spools of thread as a result of this practice. You could experience frustration if your thread breaks in the middle of your sewing session if you are not careful while choosing the thread for your sewing project.
Your machine will continue to operate even though it is not sewing anything when a thread breaks. Your cloth will be torn but not stitched when this occurs.
ii. The thread isn’t inserted correctly into the machine:
The way you’re utilizing your thread can be the issue if it’s not the thread itself.
If you thread your machine incorrectly, you could start sewing and not get a single stitch. The thread may break if the machine is improperly threaded, which could result in an accumulation of knots.
It’s a good thing that threading issues can be fixed quickly. When you are threading the machine, you can see if you made a mistake or omitted a step.
Additionally, you have the option of beginning over and threading the machine from the spool up. Make sure you are threading your machine precisely according to the directions by consulting your instruction manual. The way that different sewing machine models must be threaded may differ slightly.
It’s a good idea to review the instructions and double-check your work if you’re using a new machine or if you’re not comfortable with each step of the threading procedure. To sew well, you must become familiar with how to thread your particular machine.
iii. Your Bobbin has a problem:
To finish a stitch on your sewing machine, the top thread and bobbin thread must both be active. The same quality problems that affect your top thread can also affect your bobbin.
A machine that is unable to finish its stitches can be your direct result if you made the bobbin from the thread that is about to break and of poor quality. The installation and threading of your bobbin are also necessary in order for the thread to grab the needle. Check to make sure your bobbin is installed correctly and the thread is prepared to be collected and used in the stitch.
iv. The problem might be with the needle:
if your machine has an issue with making holes but not sewing them together, then there is a possibility of the problem being with the needle.
Sometimes the cloth or thread you choose won’t work with the needle you are using. Needles come in different sizes and systems. Different needle requirements will apply to various fabrics, threads, and machines.
Make sure you are using a needle compatible with that kind of thread if you are switching from the thread type you often use. If you attempt to sew with a new thread that is too thick for your needle, it will probably break.
It’s likely that switching out your existing needle for a new one that is identical to it will fix your problem if you are certain that the needle you are using is appropriate for the thread and fabric you have chosen.
v. There’s a Tension Issue with the Machine
When the tension on your machine is set too high, your thread can also break easily. For various jobs and materials, your machine has a number of different tension settings. Your tension dial will typically begin at zero and rise to 8 or 9.
The stress decreases as the number decreases. The thread will be loose and sagging as it passes through the machine if your tension is too low.
The greater the number, the more anxious you’ll feel. When your top thread is too tight, the stitch will have to be finished by pulling the bobbin thread all the way up.
Undesirable and uneven stitching is produced by tension settings that are either too high or too low. It may result in the fabric puckering around the stitches or the stitches not staying in place.
Furthermore, if your tension is too high, your thread may be under too much pressure for it to withstand. When this occurs, your thread will break, which will stop your machine from sewing.
How To Fix Sewing Machine Making Holes But Not Sewing?
There are a few things that you can do in order to try and fix your sewing machine that is only making holes but not sewing.
- One thing you can try is checking the tension of the thread. If it appears that there might be something wrong with the thread, you can always adjust it manually. You may also want to check for any clogs or jams in the machine’s sewers.
- If the sewing machine is not stitching properly, it may be due to a number of factors. One of the most common causes is a broken thread.
If you are certain that the quality of the thread is to blame for your machine, not sewing, the following information will be helpful to you and your sewing project.
Since a weak thread won’t be very strong or durable in holding your finished object together, you shouldn’t use one anyway. Keep in mind that compared to other colours, black thread tends to break more easily. All brands appear to agree on this.
If at all feasible, spend a bit more on a reliable manufacturer’s premium black thread to prevent breaking. If feasible, use a different colour if the black thread is breaking frequently for you.
- Also, make sure that the thread is passing through the needle correctly.
- The tension of the thread may need to be adjusted in order to fix the problem. If the machine is not properly threaded, it will not be able to produce the correct amount of tension, which will cause the stitches to be loose and inaccurate.
The fact that sewing machines aren’t always able to make proper holes is a frustrating problem that can be easily fixed. By adjusting the tension, separating the metallic thread from the synthetic fibre, and making adjustments to the sewing machine’s feed dogs and blade.
Recommended Posts:
Conclusion
Following the guide above, you should be able to know why your machines make holes but won’t sew. And you should also be able to fix the problem.