Janome sewing machine not feeding fabric is a very common problem with this machine. Firstly, a machine not feeding fabrics means that the machine’s feed dogs are not coming up to move the fabric toward or underneath the needle.
Fortunately, there are a few things you can do to try to fix the problem. Firstly, check to see if the feed dogs are down. If they are, raise them by turning the knob on the side of the machine.
Another thing to check is the tension on the sewing machine. The tension should be correct for the type of fabric you are using. If the tension is too loose, the fabric will not be fed correctly. If the tension is too tight, the fabric may be pulled too tightly which might cause it to ruin the fabrics or jam the machine.
What Causes Janome’s Sewing Machine To Not Feed Fabrics
There are lots of possible reasons why your Janome sewing machine is not feeding fabrics. It can range from improperly engaged feed dogs to incorrect needle insertion. here are possible reasons why your Janome sewing machine is not feeding fabrics.
1. Feed Dogs Are Down, Worn, Or Jammed
One of the most common causes of a Janome sewing machine not feeding fabrics correctly is a problem with the feed dogs.
If the feed dogs are down, worn, or jammed, they may not be able to grab and move the fabric correctly. This can cause a variety of problems, including fabrics bunching up or not moving at all.
If you suspect that your feed dogs are the cause of your sewing machine problems, the first step is to check the owner’s manual for your specific model.
Many Janome sewing machines have a lever or switch that can be used to lower the feed dogs, which can make it easier to clean or repair them. Once the feed dogs are lowered, you can use a soft brush to clear away dirt or lint that’s stopping them from feeding fabrics. Also, if the feed dogs are worn out, it’s advisable to replace them entirely.
2. Incorrect Threading
Incorrect threading can also cause your Janome sewing machine not to feed fabric. Every sewing machine has a specific way it has to be threaded, if you insert the thread incorrectly, then it can cause it to not feed fabrics.
To fix this, first, check that the upper thread is properly threaded through the needle. If it isn’t, re-thread it and try again. If the problem persists, check the tension of the upper thread. It should be snug but not too tight.
If the tension is too loose, the upper thread will not be able to properly grip the fabric and feed it through. If the tension is too tight, the upper thread may break. Adjust the tension accordingly and try sewing again.
3. Your Machine’s Presser Foot Is Not Down
Most sewers usually forget to put down their presser foot when sewing fabrics. And this can cause your sewing machine not to feed fabrics.
Ensure you always remember to put down your presser foot before sewing. If the problem persists, consult your sewing machine’s manual for troubleshooting tips.
4. Thick Fabrics
Sewing a thick fabric could cause your Janome sewing machine not to feed fabrics.. Janome machines are designed to handle a variety of fabric thicknesses, but very thick fabric can sometimes be a problem.
If you’re having trouble feeding thick fabric through your machine, try using a thinner needle. You may also need to increase the pressure of the presser foot.
5. Dirty Machine
Dirt can be one of the reasons why your Janome sewing machine is not feeding fabrics. Over time, lint and other debris can build up in the machine, causing it to function less efficiently.
Generally, you will need to remove the lint screen and use a soft brush to remove any debris. You may also need to use a vacuum cleaner with a soft brush attachment to reach any areas that are difficult to access.
Once you have cleaned the machine, be sure to replace the lint screen and check that all parts are properly secured before using the machine again. If it’s dirt that’s stopping the machine from feeding fabrics, it should start feeding fabrics once you’ve gotten rid of all the dirt.
Why Does My Janome Sewing Machine Keep Unthreading?
Sewing machine unthreading is very common and Janome’s sewing machine is not an exception. Here are possible reasons why your Janome sewing machine keeps unthreading.
1. The Machine Is Not Threaded Correctly
If you have a sewing machine that keeps unthreading most of the time. Incorrect threading could be the issue.
Most sewing machines have a certain way they have to be threaded and if you skip a step it can cause the sewing machine to start unthreading. Ensure you check the manual to know the right way the machine has to be threaded.
2. Low-Quality Threads
Using old or low-quality thread can cause your Janome sewing machine to unthread. If the thread is too thick it can make the machine unthread, also if the thread is too thin it can cause the sewing machine to unthread.
Ensure you invest in quality threads to avoid causing your sewing machine to unthread.
3. Loose Tension
The tension of the sewing machine can cause the sewing machine to unthread. If you don’t have the correct tension it can cause the thread to break which can cause the sewing machine to unthread.
Ultimately, to avoid your Janome sewing machine untreading, ensure that the thread tension is set properly. If the tension is too loose, the thread will easily come undone.
Also, make sure that the presser foot is properly positioned; if it is raised too high, the thread can become disengaged. Finally, ensure that the needle is properly inserted and aligned; a misaligned needle can cause the thread to come undone. If you have checked all of these things and the problem persists, it is best to take your machine to a professional for further diagnosis.
How Often Should I Oil My Janome Sewing Machine?
You should lubricate your Janome sewing machine at least every 2 weeks for optimal usage. However, if you use the sewing machine frequently you should lubricate it every week or after using it for any project.
Factors To Keep In Mind When Oiling Your Janome Sewing Machine
There are several factors that need to be considered when attempting to oil your Janome sewing machine.
Firstly, always refer to your Janome sewing machine’s manual for specific instructions on how to oil your particular model Secondly, be sure to use only sewing machine oil – do not use any other type of oil, as this can damage your machine.
Oiling your Janome sewing machine on a regular basis is a simple way of elongating the machine’s lifespan.
How Long Will A Janome Sewing Machine Last?
The lifespan of a Janome sewing machine ultimately depends on how you maintain and take care of it. If properly taken care of, Janome can last from 5 to 10 years or even more.
Ensure that you clean and oil the sewing machine regularly if you want to extend its lifespan.
Conclusion
Sewing machine not feeding fabric is a common issue with Janome sewing machines. However, this issue can be fixed easily. We’ve included possible causes why your Janome sewing machine is not feeding fabric and also ways to fix it.
Following the instructions in this article, you should be able to correctly fix your Janome sewing machine that’s not feeding fabric.